Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Milwaukee, WI
Milwaukee chimney work starts with looking, not brushing. Most of the city’s chimneys are brick masonry built before 1950, and a century of hard freeze-thaw winters has left many of them with cracked clay tiles, spalling brick, or no liner at all. Because we handle diagnosis and repair with the same technicians, an inspection here tells you what’s actually wrong and what it takes to fix it. Call (855) 935-4194 to book a chimney inspection.
Why Milwaukee Homes Are Different
Milwaukee’s housing stock sets the terms of the job. The city is full of pre-1950 brick duplexes, bungalows and Polish Flat-style cottages, and many still have their original masonry chimneys with several flues serving a furnace, a water heater and a fireplace off one stack. In older neighborhoods like the East Side, Riverwest and Walker’s Point, a large share of those flues are unlined or lined with clay tile that has degraded over decades of weather.
The climate does the rest. Milwaukee winters swing between sub-zero cold snaps and thaws near 40°F, and moisture trapped in masonry expands and spalls through those cycles. Prevailing east winds off Lake Michigan add humidity that speeds deterioration on east- and north-facing chimneys. That’s why spring and fall are the busiest times for inspections here – after winter damage, before the heating season starts again.
The dangerous pattern we see most in Riverwest and Bay View is the orphaned water heater. When a high-efficiency furnace goes in, the old water heater is sometimes left venting into a big, cold exterior masonry chimney that was never sized for it. Those flues run cold, draft poorly, and get red-tagged for good reason.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Milwaukee Services
Two jobs bring most Milwaukee homeowners to the phone: a sweep to clear the flue, and a repair when the inspection turns up damage.
Chimney Sweep in Milwaukee
A chimney sweep in Milwaukee is rarely just creosote removal. We run rotary brushes sized to the flue, then vacuum the firebox and smoke chamber so nothing ends up in your living room. On the multi-flue stacks common in Milwaukee’s older brick duplexes, we sweep each flue that serves an active appliance, not only the fireplace. In neighborhoods like Riverwest, the sweep is often where we first spot a cracked tile or a water heater venting into an oversized cold chimney. For the full rundown, see chimney sweep.
Chimney Repair in Milwaukee
Repair in Milwaukee means masonry and liner work that holds up through another freeze-thaw winter. Cracked clay tiles get relined with a flexible system like DuraFlex, and damaged flue walls can often be resurfaced with HeatShield ceramic rather than replaced outright. Spalled crown and missing cap work gets a Famco or Copperfield cap set to manufacturer spec to keep rain and animals out. Because the technicians who inspect also repair, nothing gets handed off. Details live on our chimney repair page.
Chimney Inspection in Milwaukee
Chimney inspection in Milwaukee is how you find out whether a pre-1950 brick chimney is safe to burn. With so many homes carrying unlined or minimally lined flues and a century of freeze-thaw cycling behind them, an inspection here looks for cracked tiles, spalling brick and orphaned appliances venting into cold stacks. Our Chimney Inspection covers all three levels, and we document what we find with photos you can see for yourself.
Fireplace Inspection
The fireplace you actually burn in gets its own look: firebox, damper, smoke chamber and the flue directly above it.
Signs you need it
You smell smoke in the room when the fire is lit, the damper sticks or won’t seal, or you’ve bought an older Milwaukee home and don’t know when the fireplace was last checked.
What it costs in Milwaukee
A fireplace inspection typically runs $125 to $250, and the written estimate confirms the final price before any work starts.
How we do it
We inspect the firebox and damper by hand, run a camera up the flue, check the smoke chamber and crown, and photograph anything that needs attention.
Level 2 Chimney Inspection
This is the inspection that fits most Milwaukee buying and selling situations, and any change to the chimney system.
Signs you need it
You’re buying or selling a house, you’ve had a chimney fire, you’ve switched to a new appliance, or an earthquake or severe storm has hit the area.
What it costs in Milwaukee
A Level 2 inspection typically runs $250 to $450 in Milwaukee, and the written estimate sets the final price for the visit.
How we do it
We run a video camera the full length of every flue and record the condition of the liner, joints, offsets and termination for your report.
What Chimney Inspection Costs in Milwaukee
These are typical ranges for inspection work in Milwaukee. The written estimate you get before booking is the price you pay.
| Item | Typical range in Milwaukee |
|---|---|
| Fireplace inspection | $125 – $250 |
| Standard chimney inspection | $150 – $300 |
| Level 2 inspection with camera | $250 – $450 |
Can an inspection catch a chimney fire before it happens?
Often, yes. A camera inspection finds cracked tiles, heavy creosote glaze and liner gaps that raise fire risk, so you can fix them before a fire starts. Call (855) 935-4194 for an exact quote; estimates are free.
Do I need a Level 2 inspection to sell my Milwaukee house?
A Level 2 inspection is what buyers and their inspectors usually ask for on a pre-1950 Milwaukee home, since it covers every flue with video. It documents the chimney’s real condition before negotiations. Call (855) 935-4194 for an exact quote; estimates are free.
Brands We Service in Milwaukee
We work with an intentional roster of professional chimney products, including DuraFlex liners, Olympia Chimney systems, Famco and Copperfield caps, plus HeatShield resurfacing. We don’t stock parts on trucks; we spec the right material for the job and schedule the work. Most repairs are booked within a normal turnaround once you approve the written estimate. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Milwaukee, WI
Every figure below is a typical range for the Milwaukee market. Your written estimate replaces it with an exact price for your chimney.
| Service | Typical range in Milwaukee |
|---|---|
| Fireplace inspection | $125 – $250 |
| Standard chimney inspection | $150 – $300 |
| Level 2 inspection with camera | $250 – $450 |
Price in Milwaukee climbs with height, roof pitch, the number of flues on a multi-flue stack, and whether repair work like relining or resurfacing is needed. We give you the upfront number before we book, and that written estimate is what you pay.
Neighborhoods We Serve in Milwaukee
We book chimney inspection and repair across Milwaukee, including the older brick neighborhoods where this work matters most. Response times are shortest when you call early in the week; the fall rush fills quickly once the first cold snap hits.
- East Side
- Riverwest
- Walker’s Point
- Bay View
- Washington Heights
Service Area – Cities Near Milwaukee
We also take chimney inspection and repair calls in the communities around Milwaukee. If you’re just outside the city line, we can usually schedule you in the same booking queue. Homeowners in Shorewood, WI and Wauwatosa, WI get the same brick-and-freeze-thaw inspection we run in Milwaukee. So do folks in Glendale, WI and West Allis, WI.
Serving Milwaukee, WI – Our Local Coverage Area
We serve Milwaukee and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Milwaukee
Call and we’ll book you into the next open slot, usually within a few days. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 935-4194.
Relining and structural masonry repairs often require a permit from the city, and some Milwaukee HOAs set rules about exterior caps and chimney appearance. We flag what applies to your address during the estimate so you’re not caught out.
We take inspection and repair calls across Milwaukee and the surrounding suburbs, not just the historic brick districts. If you’re unsure whether your address is in range, call (855) 935-4194 and we’ll confirm.
If your Milwaukee chimney hasn’t been looked at since the last heating season, book a chimney inspection before you light the first fire. Call (855) 935-4194 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Milwaukee Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Robert Sutton"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Danika Ingram"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Nicole Kowalski